Category: cps

Subject Medical waste incinerator Day Capacity 1000kg Waste Type Medical waste   https://www.hiclover.com/#!/Model-TS100-Medical-Waste-Incinerator-100-150kgs-per-hour-capacity/p/416001748/category=0   Description Brand Model Fuel Type Medical Incinerator HICLOVER TS100 Diesel Oil/Natural Gas *Primary combustion chamber *Secondary combustion chamber *Smoke filter chamber * Stainless Steel chimney *Auto PLC control system *Italy brand burner * Automatic Protection Operator(APO) *Heavy duty refractory chamber *Corundum […]
1, Using fever of gasifying unites burning technology. It applied to burn various  kinds of medical waste, such as syringes, infusion set, disposable dressing, and also  small animal, some city waste, like paper, tree leaves. 2, Closed vacuum-wide operation, applicable to treat infectious medical waste and to prevent secondary pollution. 3, Whole design, easy to […]
CONTAINERISED WASTE INCINERATOR Incinerator Items/Model HICLOVER TS150(PLC) Picture   Burn Rate (Average) 100-150 kg/hour Feed Capacity(Average) 300kg/feeding Control Mode PLC Automatic Primary Combustion Chamber 1500Liters(1.5m3) Internal Dimensions 1500x1000x1000mm Secondary Chamber 750Liters(0.75m3) Smoke Filter Chamber Wet Scrubber Feed Mode Manual/Mechanical Voltage 415V 3P Power 10.0Kw 3.1. THE PRESENT SITUATION IN SOUTH SUDAN IS HOSTILE, UNPREDICTABLE AND […]
waste disposal:2500 kg/day (camp municipal waste) The incinerator should be modern and complies to environmental legislation. • The unit should be designed to accept all forms of camp waste. • The machine has to be a steel outer casing and is lined with our tri-layer insulation system to give it the highest thermal efficiency on the market. • The unit has to be disposes of the waste in an environmental efficient way. The unit will fully complies with Iraq legislation. Specification Summary • The burn rate is 2500kg/hr • The Incinerator must have fully automatic PLC control system with temperature recording capability. For the manufacture and supply of a fully automated camp waste treatment and disposal system comprising of a Freestanding 2500kg/hr incinerator and associated equipment. Being specifically designed for the incineration and thorough destruction of a wide range of camp wastes the completed system would be fully compliant with the relevant local legislation. It would have a nominal throughput capacity of 2500kgs per hour of solid waste material. It would comprise of the following: 1. Solid Waste Handling A mechanically operated bin lifting and tipping mechanism designed to accept 1100 litre waste bins fitted with side trunnions and/or a comb lift point and a hinged lid. The unit would be complete with a safety cage, an interlocked access gate, a geared drive motor and all electrical requirements. 2.Solid Waste Loading One hydraulically operated, automatically sequenced, ram feeder unit, with reception hopper. The feeder would be complete with a powered hopper lid, a powered ram pusher plate, hydraulic cylinders and pipework and all electrical requirements. The feeder would be set horizontally, directing waste into the incinerator vestibule.
Items/Model TS250(PLC) Picture Principle Waste Incineration Treatment Burn Rate Average 250 kg/hour Feed Capacity Average 400kg/feeding Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 2000L Internal Dimensions 210x88x110cm Secondary Chamber 1000L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V Power 2.0Kw Oil Consumption (kg/hour) Average 24.2(DO) Gas Consumption (m3/hour) *** Temperature Monitor Digital Display […]
General specifications of a 100 kg/hr incinerator No. Description Parameter value     model   HICLOVER YD100 1 Machine working mode Oil + Power Oil + Power 2 Voltage 220V C 3 phase or 1 phase 220V 1P 3 Oil consumption (lit/hr) Average 25-32 lit/hr/chamber Average 33Liters/hour/total incinerator 3 burners 6 Incineration rate 100 kg/hr […]
General specifications of a 100 kg/hr incinerator No. Description Parameter value     model   HICLOVER YD100 1 Machine working mode Oil + Power Oil + Power 2 Voltage 220V C 3 phase or 1 phase 220V 1P 3 Oil consumption (lit/hr) Average 25-32 lit/hr/chamber Average 33Liters/hour/total incinerator 3 burners 6 Incineration rate 100 kg/hr […]
Incinerator Parts Mineral Insulated Thermo couple sensor K-Type 300SS K type 300SS: M27*2, 300mm Ins,2520 S.S, 2.5mm core  HICLOVER – Medical Environmental    WWW.HICLOVER.COM Waste Incinerators Medical Waste Incinerator Pet Animal Cremation Solid Waste Incinerator Tel:  +86-25-8461 0201    Mobile: +86-13813931455(whatsapp/wechat)Website: www.hiclover.com  Email: sales@hiclover.comEmail: hicloversales@gmail.com   Nanjing Clover Medical Technology Co.,Ltd.   2020-06-27
Incinerator Parts Mineral Insulated Thermo couple sensor K-Type 300SS K type 300SS: M27*2, 300mm Ins,2520 S.S, 2.5mm core  HICLOVER – Medical Environmental    WWW.HICLOVER.COM Waste Incinerators Medical Waste Incinerator Pet Animal Cremation Solid Waste Incinerator Tel:  +86-25-8461 0201    Mobile: +86-13813931455(whatsapp/wechat)Website: www.hiclover.com  Email: sales@hiclover.comEmail: hicloversales@gmail.com   Nanjing Clover Medical Technology Co.,Ltd.   2020-06-27
Items/Model TS50M Picture   Burn Rate Average 50 kg/hour Feed Capacity Average 50-150 per feeding Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 450L Internal Dimensions 75x75x80cm Secondary Chamber 225L Smoke Filter Chamber Yes Feed Mode Manual Feeding Voltage 220V Power 0.5Kw Oil Consumption (kg/hour) Average 13.3 Gas Consumption (N.G, m3n/Hour) Average 16 Gas Consumption […]